|
Fisicalsharing
|
 |
« em: 30-03-2010 , 23:01 » |
|
Aqui fica este cantinho para irmos debatendo as configuraçoes deste emu que está a dar cartas...
Podemos ir dizendo que configurações que os nossos membros utilizam para a leitura dos respectivos cards.
|
|
|
|
|
|
|
Fisicalsharing
|
|
« Responder #1 em: 22-05-2010 , 11:33 » |
|
oscam.server[reader]
label = zon
protocol = internal
detect = CD
device = /dev/sci0
group = 1
emmcache = 1,3,2
mhz = 1000
cardmhz = 368
CAID = 1802
n3_boxkey =..............
n3_rsakey =...............
ReconnectTimeout = 20
DisableServerFilter = 1 oscam.conf[global]
nice = -1
logfile = /tmp/oscam.log
maxlogsize = 102400
fallbacktimeout = 2
clienttimeout = 5
clientmaxidle = 120
cachedelay = 150
bindwait = 120
netprio = 0
resolvedelay = 30
sleep = 0
unlockparental = 0
serialreadertimeout = 1500
waitforcards = 1
preferlocalcards = 1
[cs357x]
Port = 15000
[newcamd]
port = 15000@1802:000000
key = 0102030405060708091011121314
allowed = 127.0.0.1
keepalive = 1
[webif]
httpport = 99
httpuser = user
httppwd = pass
httprefresh = 0
httpallowed = 192.168.1.00// ip pc
httphideidleclients = 0
httpreadonly = 0
[anticasc]
enabled = 0
numusers = 0
sampletime = 2
samples = 10
penalty = 0
aclogfile = ./oscam_ac.log
denysamples = 8
fakedelay = 1000 oscam.user[account]
user = user
pwd = pass
disabled = 0
group = 1
Hostname = 192.168.1.00
uniq = 0
sleep = 0
monlevel = 4
au = zoncard
services = 1,2,3,S
caid = 1802
ident = 1802:000000,004801,004901
CCcam.cfgL: 127.0.0.1 15000 user pass 1802 000000 256
|
|
|
|
|
|
|
Fisicalsharing
|
|
« Responder #2 em: 10-11-2010 , 18:48 » |
|
oscam.ac
# # anti-cascading table # # format: <CAID>:<provider ID>=<seconds> 0500:000000=10 *=7
#
# Issuer Public Keys (IPK)
#
# format: CAID:reserved:KEY
0100:00000000:000102030405060708090A0B0C0D0E0F101112131415161718191A1B1C1D1E1F202122232425262728292A2B2C2D2E2F303132333435363738393A3B3C3D3E3F
oscam.conf
#
# main configuration
#
[global]
nice = -1
WaitForCards = 1
# logging
logfile = /var/log/oscam/oscam.log
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
# monitor
[monitor]
port = 988
aulow = 120
monlevel = 1
# web interface
[webif]
httpport = 8888
httpuser = myusername
httppwd = mypassword
# anti-cascading
[anticasc]
enabled = 1
numusers = 1
sampletime = 2
samples = 5
penalty = 1
aclogfile = /var/log/oscam/aclog.log
denysamples = 9
# protocols
[newcamd]
key = 000102030405060708090A0B0C0D
port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF
[radegast]
port = 20000
user = user1
allowed = 192.168.0.0-192.168.255.255
[cs378x]
port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0300:FFFFFF
[cccam]
port = 40000
version = 1.2.3
build = 1234
reshare = 2
[gbox]
password = password1
maxdist = 4
cardinfos = card.infos
ignorelist = ignore.list
onlineinfos = online.infos
locals = 01000000,02000000,0300FFFF
[serial]
device = user2@/dev/ttyS0?delay=1&timeout=300
[dvbapi]
enabled = 1
user = user1
socket = /tmp/camd.socket
oscam.dvbapi
. # # dvbapi configuration # # types: # P - Priority # format: # P: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] # I - Ignore # format: # I: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] # M - Map # format: # M: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>] # D - Delay # format: # D: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)> # # P: 0500:023800 # prioritize 0500 with provider 023800 P: :::1BCD # prioritize ecm stream with pid 1BCD on any channel P: 1722 # prioritize 1722 P: 1830::EF75 # prioritize 1830 on channel EF75 only M: 1830 1830:003411 # map caid 1830 always to provider 003411 D: 1702 200 # wait 200ms before writing cw on caid 1702 I: :002000 # ignore provider 002000 on every channel I: 0 # ignore every caid that was not handled before
#
# CAID guessing table
#
# format: <len>:<caid>
12:3456
oscam.ird
#
# Irdeto guessing table
#
# format: <byte3>:<byte4-7>:<CAID>:<SID>
12:0000000A:12AB:CD01 oscam.provid
# # provider table # # format: <caid>:<provid>|<provider>|<satellite>|<language> 0100:012345|MyPay-TV1|Astra 19.2E|German 0200:543210|MyPay-TV2|Hot Bird 13.0E|English 0300:112233|MyPay-TV3|Hot Bird 13.0E|Italian 0400:223344|MyPay-TV4|Atra 28.2E|English
#
# reader configuration
#
# serial reader
[reader]
label = reader1
protocol = mouse
detect = CD
device = /dev/ttyS0
group = 1
emmcache = 1,3,2
services = services1
caid = 0100
# USB serial reader
[reader]
label = reader2
protocol = mouse
detect = CD
device = /dev/ttyUSB0
aeskey = 000102030405060708090A0B0C0D0E0F
group = 2
emmcache = 1,3,2
services = services2
caid = 0200
# remote newcamd reader with fallback for group 1
[reader]
label = remote1
protocol = newcamd
key = 0102030405060708091011121314
device = 192.168.0.2,66666
account = login1,password1
group = 1
fallback = 1
# remote camd 3.78x reader with fallback for group 2
[reader]
label = remote2
protocol = cs378x
device = 192.168.0.3,23456
account = login2,password2
group = 2
fallback = 1
# remote gbox reader
[reader]
label = remote3
protocol = gbox
device = 192.168.0.4,34567,45678
account = login3,password3
group = 3
caid = 0300
# remote CCcam reader
[reader]
label = remote4
protocol = cccam
device = 192.168.0.5,45678
account = login4,password4
group = 4
caid = 0400
cccversion = 1.2.34
cccbuild = 5678
# remote radegast reader
[reader]
label = remote5
protocol = radegast
device = 192.168.0.6,56789
group = 5
caid = 0500
# PCSC reader
[reader]
label = mypcscreader
protocol = pcsc
device = 0
aeskey = 0102030405060708090a0b0c0d0e0f10
group = 6
caid = 0600
# Smargo Smartreader+
[reader]
label = mysmartreader
protocol = smartreader
device = 001:002
aeskey = 0102030405060708090a0b0c0d0e0f10
group = 7
caid = 0700
# internal reader
[reader]
label = myinternalreader
protocol = internal
device = /dev/sci0
group = 8
caid = 0800
# AD-Teknik AB Multiprogrammer 3.5 serial
[reader]
label = reader9
protocol = mp35
detect = CD
device = /dev/ttyS1
group = 9
emmcache = 1,3,2
services = services9
caid = 0900
# AD-Teknik AB Multiprogrammer 3.6 USB
[reader]
label = reader10
protocol = mp35
detect = CD
device = /dev/ttyUSB1
group = 10
emmcache = 1,3,2
services = services10
caid = 1000
# AD-Teknik AB USB Phoenix at 6.00 mhz
[reader]
label = reader11
protocol = mp35
detect = CD
device = /dev/ttyUSB2
mhz = 600
group = 11
emmcache = 1,3,2
services = services11
caid = 1100
oscam.services
#
# definition of services
#
# format:
# [name]
# caid=CAID[,CAID]...
# provid = provider ID[,provider ID]...
# srvid = service ID[,service ID]...
[services1]
caid=0100
provid=000001,ABCDEF
srvid=0001,0002,000A,000B
[services2]
caid=0200
srvid=0003,0004,000C,000D
|
|
|
|
|
Fisicalsharing
|
|
« Responder #3 em: 10-11-2010 , 18:50 » |
|
oscam.srvid
#
# Sky Deutschland
#
1722:6dc9|UM|France 2|Radio|
1722:6dca|UM|France 3|Radio|
1722:6dcb|UM|France 5|Radio|
1722:6dcd|UM|Radio Italia|Radio|
1722:6dce|UM|Poker Channel Europe|Radio|
1722:4e8b|UM|iMusic 1|Radio|
1722:4e8c|UM|Juwelo|Radio|
1722:69de|UM|Deluxe Music|Radio| oscam.tiers
#
# TIERS
#
0001,0002,0003:000a|my TIER 1
0004:000b|my TIER 2
0005:000b|my TIER 3
oscam.user
#
# user configuration
#
# user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled
[account]
user = user1
pwd = password1
monlevel = 0
uniq = 1
group = 1
au = reader1
services = services1
betatunnel = 0300.FFFF:0100,0400.FFFF:0100
ident = 0100:000000
caid = 0100
# user for group 2 with monitor access, AU enabled
[account]
user = user2
pwd = password2
monlevel = 1
uniq = 0
group = 2
au = reader2
services = services2
ident = 0200:000000
caid = 0200
# user for group 2 without monitor access, AU disabled, account disabled
[account]
user = user3
pwd = password3
disabled = 1
group = 2
services = services2
ident = 0200:000000
caid = 0200
# user for group 3 without monitor access, only one connection possible, AU disabled, multiple idents
[account]
user = user4
pwd = password4
monlevel = 0
uniq = 1
group = 3
ident = 0300:000000,FFFFFF;0400:FFFFFF
caid = 0300
# user for group 5 with anti-cascading, only 1 logging allowed, send fake CWs as penalty
[account]
user = user5
pwd = password5
group = 5
services = services5
ident = 0500:000000
caid = 0500
numusers = 1
penalty = 1
|
|
|
|
|
Fisicalsharing
|
|
« Responder #4 em: 20-11-2010 , 20:48 » |
|
oscam.conf(5)
NAME
oscam.conf - main configuration file for OSCam
SYNOPSIS
The main configuration file for OSCam contains global parameters such
as debugging, logging, monitor, protocols and anti-cascading. sections
in oscam.conf are nonrecurring. The [global] section is required. All
other sections are optional.
DESCRIPTIONS
The [global] section
serverip = IP address
bind service to specified IP address, default:all
logfile = filename|/dev/null|/dev/tty|syslog
logging target, default: /var/log/oscam.log
disablelog = 0|1
1 = disable log file, default:0
disableuserfile = 0|1
1 = avoid logging although logfile is set, default:0
pidfile = filename
PID file, default:no PID file
usrfile = filename
log file for user logging, default:none
log file format:
date
time
CWs per second
username
IP address of client
TCP/IP port
CWs found
CWs from cache
CWs not found
CWs ignored
CWs timed out
CWs tunneled
login time in unix/POSIX format
logout time in unix/POSIX format
protocol
cwlogdir = path
directory for CW logging, default:none
clienttimeout = seconds
value for client process to wait for key, default:5
fallbacktimeout = seconds
time falling back to fallback reader, default:2
clientmaxidle = seconds
value for client process being idle before disconnect, default:120
cachedelay = milli-seconds
value to delay cached requests , default:0
bindwait = seconds
value to wait for bind request to complete, default:120
netprio = priority
network priority, default:system given
resolvedelay = seconds
delay for DNS resolving, default:30
sleep = minutes
time waiting for inactive users, default:none, can be overwritten
per user in oscam.user
unlockparental = 0|1
1 = unlock parental mode option to disable Seca pin code request for
adult movie, default:0
nice = -20..+20
system priority, default:99
serialreadertimeout = milli-seconds
timeout for serial reader, default:1500
maxlogsize = kbytes
max log file size, default:10
waitforcards = 0|1
1 = wait for local SCs on startup before opening network ports,
default:0
preferlocalcards = 0|1
1 = try decoding on local cards first, default:0
The [monitor] section
port = 0|port
UDP port for monitor, port=0 monitor disabled, default:0
serverip = IP address
bind service to specified IP address, default:all
nocrypt = IP address|IP address range[,IP address|IP address range]...
unsecured monitor connection, default:none
example: nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
aulow = minutes
time no EMM occurs so that client is set to low, default:30
monlevel = 0|1|2|3|4
monitor level:
0 = no access to monitor
1 = only server and own procs
2 = all procs, but viewing only, default
3 = all procs, reload of oscam.user possible
4 = complete access
monlevel can be overwritten per user in oscam.user
hideclient_to = seconds
time to hide clients in the monitor if not sending requests, 0 =
disabled, default:0
appendchaninfo = 0|1
1 = append channel name on log messages, default:0
The [webif] section (only if web interface module enabled)
httpport = port
port for web interface, 0 = disabled, default:none, required
httpuser = username
username for password protection, default:none
httppwd = password
password for password protection, default:none
httpcss = path
path for external CSS file, default:none
httptpl = path
path for external templates, default:none
httprefresh = seconds
status refresh in seconds, default:none
httptpl = path
path for external templates, default:none
httphideidleclients = 0|1
1 = enables hiding clients after idle time set in parameter hide
client_to, default:0
httpscript = path
path to an executable script which you wish to start from web inter
face, default:none
httpallowed = IP address|IP address range[,IP address|IP address
range]...
http web interface connections allowed, default:none
example: httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
The [camd33] section
port = 0|port
TCP/IP port for camd 3.3x clients, 0 = disabled, default:0
serverip = IP address
bind service to specified IP address, default:all
nocrypt = IP address|IP address range[,IP address|IP address range]...
unsecured camd 3.3x client connection, default:none
example: nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
passive = 0|1
1=force passive camd 3.3x client, default:0
key = 128 bit key
key for camd 3.3x client encryption, default:none
example: key = 01020304050607080910111213141516
The [camd35] section
port = 0|port
UDP port for camd 3.5x clients, 0 = disabled, default:0
serverip = IP address
bind service to specified IP address, default:all
The [newcamd] section
port = port@CAID[:ident][,ident]...[;port@CAID[:ident][,ident]...]...
TCP port/CAID/ident definitions, default:none
example: port = 10000@0100:100000;20000@0200:200000,300000,400000
Each CAID requires a separate port.
serverip = IP address
bind service to specified IP address, default:all
allowed = IP address|IP address range[,IP address|IP address range]...
client connections allowed from, default:none
example: allowed = 127.0.0.1,192.168.0.0-192.168.255.255
keepalive = 0|1
0 = disable keepalive, default:1
key = DES key
key for newcamd client encryption, default:none
example key = 0102030405060708091011121314
The [radegast] section
port = 0|port
TCP/IP port for radegast clients, 0=disabled, default:0
serverip = IP address
bind service to specified IP address, default:all
allowed = IP address|IP address range[,IP address|IP address range]...
client connections allowed from, default:none
example: allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = username
user name for radegast client
The [serial] section
device = <user>@<device>[:baud][?option1=value1[&option2=value2]]
parameters:
user = account
device = serial device name
option = timeout = milli-seconds, timeout for connection,
default:50
delay = milli-seconds, additional delay between two
characters, default:0
supported serial devices:
HSIC (humax sharing interface client)
SSSP (simple serial sharing protocol)
bomba (BOMBA firmware)
dsr9500 (DSR 9500)
The [cs357x] section
port = 0|port
UDP port for camd 3.57x clients, 0 = disabled, default:0
serverip = IP address
bind service to specified IP address, default:all
suppresscmd08 = 0|1
0 = CMD08 enabled, 1 = CMD08 disabled, default:0
The [cs378x] section
port = 0|port@CAID[:ident][,ident]...[;port@CAID[:ident][,ident]...]...
TCP port/CAID/ident definitions for camd 3.78x clients,0 = disabled,
default:0
example: port = 10000@0100:100000;20000@0200:200000,300000,400000
Each CAID requires a separate port.
serverip = IP address
bind service to specified IP address, default:all
suppresscmd08 = 0|1
0 = CMD08 enabled, 1 = CMD08 disabled, default:0
The [cccam] section
port = 0|port
TCP/IP port for CCcam clients, 0 = disabled, default:0
version = <main version>.<version>.<sub version>
define CCcam version, default:none
example: version = 1.2.34
build = <4-digit number>
define CCcam build, default:none
example: build = 5678
reshare = level
reshare level for CCcam clients, default:none
0 = no resharing
1 = resharing for direct peer only
2 = resharing for direct peer and next level
x = resharing for direct peer and next x level
The [gbox] section
password = password
password for gbox server
maxdist = distance
maximum distance to gbox servers, default:5
ignorelist = filename
listing of providers to be ignored, format: G:{<CAID><provider ID>},
default:none
example: G:{01001234}
onlineinfos = filename
file to store online information, default:none
cardinfos = filename
file to store card information, default:none
locals = <CAID><provider ID>[,<CAID><provider ID>]...
backwards sharing of local cards,default:none
example: locals = 01001234,02005678
The [dvbapi] section (only if DVB API module enabled)
enabled = 0|1
1 = DVB API enabled, default:0
user = username
user name for DVB API client, default:anonymous
ignore = <CAID>[,<CAID>]...
CAIDs to be ignored, default:none
priority = <CAID>:<provider ID>[,CAID:<provider ID>]...
CAIDs and provider IDs to be prioritized, default:CAIDs and provider
IDs of local SCs will be prioritized
au = 0|1
1 = enable AU, default:0
boxtype = dbox2|dreambox|ufs910
set boxtype, auto detection of DVB API will be aspired,
default:dreambox
The [anticasc] section (only if anti-cascading enabled)
enabled = 0|1
1 = enabled anti-cascading, default:0
numusers = quantity
anti-cascading: user per account, 0 = anti-cascading disabled,
default:0
sampletime = minutes
duration of sample, default:2
samples = quantity
quantity of samples over limit, default:10
penalty = 0|1|2
level of penalty:
0 = only logging
1 = send fake CWs
2 = disbable user temporary
default:0, penalty can be overwritten per user in oscam.user
aclogfile = filename
file for anti-cascading logging, default:none
fakedelay = milli-seconds
fake delay time, default:1000
denysamples = quantity
How many samples should be penalized?, default:8
MONITOR
monitor commands:
login <user> <password>
login (for unencrypted connections only)
setuser <user> <parameter>=<value>
set parameter for user
exit
exit monitor
log <on|onwohist|off>
enable|enable without hitory|disable logging for 2 minutes
status
list of current processes and clients
shutdown
shutdown OSCam
reload
reinit user db, clients and anti-cascading, for newcamd connections:
after reloading the ident, please restart newcamd client
details <PID>
details about selected PID
debug <level>
set debug level (monlevel > 3 required)
debug level mask:
0 = no debugging (default)
2 = ATR parsing info, ECM dumps, CW dumps
4 = traffic from/to the reader
8 = traffic from/to the clients
16 = traffic to the reader-device on IFD layer
32 = traffic to the reader-device on I/O layer
64 = EMM logging
255 = debug all
version
show OSCam version
commands
show all valid monitor commands
WEB INTERFACE
template system
The web interface allows you to create your own template. For devel
oping your own template request the orignal template with the non-
linked page savetemplates.html. Store your own template in the
directory specified by httptpl.
SSL connection to the web interface
The Apache module mod_proxy can be used to proxy requests to the web
interface. With this module its also possible to use a SSL connec
tion to the web interface.
ProxyRequests Off
<Proxy *>
Order deny,allow
Allow from all
</Proxy>
ProxyPass /oscam/ localhost:8080/
ProxyPassReverse /oscam/ localhost:8080/
For further information please read the Apache documentation.
known issues
Login is not possible by now with the Safari browser because of
incorrect stale flag handling. Increasing the AUTHNONCEVALIDSECS in
oscam-http.h would be a workaround, but also a small security risk.
EXAMPLES
[global]
logfile = /var/log/oscam/oscam.log
usrfile = /var/log/oscam/oscamuser.log
pidfile = /var/run/oscam.pid
waitforcards = 1
[monitor]
port = 988
monlevel = 1
nocrypt = 127.0.0.1
[webif]
httpport = 8888
httpuser = myusername
httppwd = mypassword
[newcamd]
key = 0102030405060708091011121314
port = 10000@0100:100000;20000@0200:200000,300000,400000
[radegast]
port = 30000
user = radegastuser
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
[camd33]
port = 40000
serverip = 192.168.0.1
key = 01020304050607080910111213141516
[cs378x]
port = 50000@0300:600000
SEE ALSO
list_smargo(1), oscam(1), oscam.user(5), oscam.server(5),
oscam.srvid(5), oscam.guess(5), oscam.cert(5), oscam.services(5),
oscam.ird(5), oscam.ac(5)
|
|
|
|
|
Fisicalsharing
|
|
« Responder #5 em: 20-11-2010 , 20:49 » |
|
oscam.guess(5)
NAME
oscam.guess - CAID guessing table for OSCam
SYNOPSIS
CAID guessing table
DESCRIPTIONS
<length of ECM>:<CAID>
CAID guessing table by len in hex, only needed for protocols (at the
moment BOMBA protocol only) that does not pass CAIDs
EXAMPLES
12:3456
SEE ALSO
list_smargo(1), oscam(1), oscam.conf(5), oscam.user(5) oscam.server(5),
oscam.srvid(5), oscam.cert(5), oscam.services(5), oscam.ird(5),
oscam.ac(5)
|
|
|
|
|
Fisicalsharing
|
|
« Responder #6 em: 20-11-2010 , 20:50 » |
|
oscam.ird(5)
NAME
oscam.ird - Irdeto guessing table for OSCam
SYNOPSIS
Irdeto guessing table
DESCRIPTIONS
<byte3>:<byte4-7>:<CAID>:<SID>
Irdeto guessing table by signature
EXAMPLES
12:0000000a:12ab:cd01
SEE ALSO
list_smargo(1), oscam(1), oscam.conf(5), oscam.user(5),
oscam.server(5), oscam.srvid(5), oscam.guess(5), oscam.cert(5),
oscam.services(5), oscam.ac(5)
stelian
Admin
Posts: 4196
|
|
|
|
|
Fisicalsharing
|
|
« Responder #7 em: 20-11-2010 , 20:50 » |
|
oscam.server(5)
NAME
oscam.server - reader configuration file for OSCam
SYNOPSIS
The server configuration file for OSCam contains reader parameters.
sections in oscam.server are recurring (more than one reader possible).
At least one [reader] section is required.
DESCRIPTIONS
The [reader] section
device = <device|bus:device>|<ip|hostname>,<port>[,<lport>]|pcsc
define local or remote reader
device: device name
bus:devivce: bus name and device name of the Smartreader+
(get the names with lsusb Bus and Device)
lport: remapping to local port
PCSC: number of PCSC readers, starting with 0
enable = 0|1
0 = deactivate reader, default=1
key = DES key
key for newcamd remote reader encryption
password = password
password for remote gbox reader
premium = ???
for gbox reader
account = user,password
user and password for remote reader
pincode = pincode
pincode for Conax and Cryptoworks SCs
services = [!]services[,[!]<services>]...
reader [de]assingment to service group, default=none
inactivitytimeout = minutes
inactivity timeout for newcamd reader, default:none
reconnecttimeout = minutes
TCP reconnect, if missing answers, default:none
disableserverfilter = 0|1
1 = ignore caid and ident settings of reader due faulty clients,
default=0
label = name
name for reader, required
fallback = 0|1
1 = define reader as fallback, standard and fallback reader must
have the same group, default:0
loadbalanced = 0|1
1 = spread requests over all loadbalanced enabled readers, default=0
logport = 0|port
camd3 reader logport, camd3 UDP must be activated, only works if
theres no camd3 cascading, 0=disabled, default=0
caid = CAID[&<mask>][,CAID[&<mask>]]...
define CAID for reader, some protocols only support one CAID,
default:mask=FFFF
example: CAID=0100,0200&FFDF
boxid = NDS box ID
NDS receiver box id
aeskey = AES key
AES key for Viaccess SCs
detect = CD|DSR|CTS|RING|NONE|gpio[1-7]
status detect of card (NONE = no detection), default:CD
cardmhz = mhz
set standard SC frequency in units of 10 kHz, for Irdeto SC set to
600, refer to OVERCLOCKING, default:357
mhz = frequency
set reader frequency in units of 10 kHz, if mhz > cardmhz you are in
overclocking mode, refer to OVERCLOCKING, default:357
deprecated = 0|1
Frist the SC will be initialized in normal mode. If it fails, the SC
will be automatically reverted to deprecated mode, so that the SC
speed will not be changed and the communication will remain on nor
mal ATR speed of 9600 baud.
1 = use deprecated SC mode only, default:0
protocol = reader protocol
reader protocol, required:
mouse
smartreader
internal
serial
camd35|cs357x
cs378x
gbox
newcamd|newcamd525
newcamd524
cccam
radegast
pcsc
cccversion = <main version>.<version>.<sub version>
define CCcam version, default:none
example: cccversion = 1.2.34
cccbuild = <4-digit number>
define CCcam build, default:none
example: cccbuild = 5678
cccmaxhop = hops
define CCcam maximum SC distance, default:10
ident = <CAID>:<ident>[,ident]...[,<CAID>:<ident>[,ident]...]...
define CAID and ident for reader
example: ident = 0100:123456,234567;0200:345678,456789
provid = ID
define provider ID for reader
class = [!]class[,[!]class]...
define class in hex for reader
example: class = 01,02,!1b,!2b
chid = CAID:ChID
define Irdeto ChID for reader
example: chid = 0100:12
showcls = quantity
number of classes subscriptions to show for Viaccess SCs, default=10
maxqlen = size
size of request queue for reader, default:128
group = groupname
reader assingment to group, required
emmcache = usecache,rewrite,logging
set EMM cache of local reader:
usecache = 0|1 1=enable EMM chaching, default:0
rewrite = determines how often one and the same EMM is written
logging = 0 = log errors only
1 = log all EMMs except the double EMMs
2 = log all EMMs
blocknano = nano[,nano]...|all
list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, only
valid for physical readers, default:none
example: blocknano = 45,93,7a,ff
blocknano = all
blockemm-u = 0|1
1 = block unique EMMs, default:0
blockemm-s = 0|1
1 = block shared EMMs, default:0
blockemm-g = 0|1
1 = block global EMMs, default:0
blockemm-unknown = 0|1
1 = block unknown types of EMMs, default:0
savenano = nano[,nano]....|all
list of EMM-nanos to save (in hex w/o 0x) or all EMM-nanos, only
valid for physical readers, default:none
example: savenano = 45,93,7a,ff
savenano = all
readnano = [path]filename
write file (usually a copy of a file saved by savenano) to your
smartcard, if no path is specified, the specified file is searched
for in the configuration directory, only valid for physical readers,
default:none
example: readnano = write.emm
readnano = /var/oscam/write.emm
n3_rsakey|rsakey = RSA key
RSA key for Nagravision SCs / CAM key data for Irdeto SCs
n3_boxkey|boxkey = box key
box key for Nagravision SCs / CAM key for Irdeto SCs
tiger_rsakey = RSA key
RSA key for Tiger Nagravision SCs
tiger_ideakey = IDEA key
IDEA key for Tiger Nagravision SCs
OVERCLOCKING
Dreambox and other internal readers
For Dreambox and other internal readers the highest possible clock
rate will be auto detected. The mhz parameter lets you override the
values chosen by OSCam, if it differs from 357 and 358, but usually
you will not set any value for mhz.
For certain Dreamboxes (especially PPC clones) the default mhz
parameter leads to slow ECM times and/or "not found" ECMs. By set
ting mhz to values like 200, 300, 400, ... 1600 you can find a value
that works for your receiver and your card. The higher the mhz
value, the slower the ECM time (strange enough).
If you choose the value too low, your card is not recognized (no ATR
or "card not supported"). If you choose the value too high, you get
slow ECM times. Our experience is that either no mhz line, or a line
mhz = 1000 works best.
Phoenix / Smartmouse reader
Overclocking does not work with Windows and Mac OS X. Set mhz
equivalent to the frequency of the reader. OSCam can not set the
frequency of the reader.
Smargo Smartreader+
Set the reader frequency with the native Smargo Smartreader+ tool
(srp_tools). Do not set mhz and cardmhz.
OSCam tries to set the baudrate automatically. A standard serial port
has limited baudrate settings, so SC overclocking might not work. When
using a serial reader the best way for overclocking is connecting it to
a FTDI based USB to serial port adapter.
If overclocking does not work, verify the effective baudrate in the
logfile. If it deviates too much from the requested baudrate, the SC
will not be recognized (no ATR) and the value for mhz should be
adjusted again. The higher the baudrate, the more accurate the effec
tive baudrate can be.
EXAMPLES
serial mouse compatible reader
[reader]
label = myserialmousereader
detect = cd
protocol = mouse
device = /dev/ttyS1
group = 1
caid = 0100
services = myservice,!thisservice
USB mouse compatible reader
[reader]
label = myusbmousereader
detect = cd
protocol = mouse
device = /dev/ttyUSB0
aeskey = 0102030405060708090a0b0c0d0e0f10
group = 2
caid = 0200
camd 3.78x reader
[reader]
label = mycamd378xreader
protocol = cs378x
device = 192.168.0.1,1234
account = user,password
group = 3
newcamd reader
[reader]
label = mynewcamdreader
protocol = newcamd
key = 0102030405060708091011121314
device = 192.168.0.2,2345
account = user,password
group = 4
CCcam reader
[reader]
label = mycccamreader
protocol = cccam
device = 192.168.0.3,3456
account = user,password
group = 5
caid = 0300,0400,0500
cccversion = 1.2.3
cccbuild = 4567
PCSC reader
[reader]
label = mypcscreader
protocol = pcsc
device = 0
aeskey = 0102030405060708090a0b0c0d0e0f10
group = 6
caid = 0600
Smargo Smartreader+
[reader]
label = mysmartreader
protocol = smartreader
device = 001:002
aeskey = 0102030405060708090a0b0c0d0e0f10
group = 7
caid = 0700
internal reader
[reader]
label = myinternalreader
protocol = internal
device = /dev/sci0
group = 8
caid = 0800
SEE ALSO
list_smargo(1), oscam(1), oscam.conf(5), oscam.user(5), oscam.srvid(5),
oscam.guess(5), oscam.cert(5), oscam.services(5), oscam.ird(5),
oscam.ac(5)
|
|
|
|
|
Fisicalsharing
|
|
« Responder #8 em: 20-11-2010 , 20:51 » |
|
oscam.services(5)
NAME
oscam.services - definition of services for OSCam
SYNOPSIS
service definitions
DESCRIPTIONS
The [<service name>] section
service name section, service name sections are recurring, required
caid = CAID[,CAID]...
listing of CAIDs in hex
provid = provider ID[,provider ID]...
listing of provider IDs in hex
srvid = service ID[,service ID]...
listing of service IDs in hex
EXAMPLES
[myservice]
CAID=0100,0200,000A
provid=000001,ABCDEF
srvid=0001,0002,000A,000B
SEE ALSO
list_smargo(1), oscam(1), oscam.conf(5), oscam.user(5) oscam.server(5),
oscam.srvid(5), oscam.guess(5), oscam.cert(5), oscam.ird(5),
oscam.ac(5)
|
|
|
|
|
Fisicalsharing
|
|
« Responder #9 em: 20-11-2010 , 20:51 » |
|
oscam.srvid(5)
NAME
oscam.srvid - service ID configuration file for OSCam
SYNOPSIS
service ID mappings
DESCRIPTIONS
CAID[,CAID]...:service ID|[provider]|[name]|[type]|[description]
mapping between CAID, service ID, provider, name, type and descrip
tion of service
ANNONTATIONS
Please use Unix text file format only.
You only need the oscam.srvid when using the monitor or the web inter
face. For saving memory consumption only insert the service IDs you
really need. Some external programs use their own oscam.srvid and do
not need the oscam.srvid of OSCam.
EXAMPLES
0001,0002,0003:000a|my provider 1|tv name 1|tv|my tv package
0004,0005,0006:000a|my provider 2|radio name 2|radio|my radio package
0006:000b|my provider 3|tv name 3|
SEE ALSO
list_smargo(1), oscam(1), oscam.conf(5), oscam.user(5) oscam.server(5),
oscam.guess(5), oscam.cert(5), oscam.services(5), oscam.ird(5),
oscam.ac(5)
|
|
|
|
|
Fisicalsharing
|
|
« Responder #10 em: 20-11-2010 , 20:52 » |
|
oscam(1)
NAME
OSCam - SC server
SYNOPSIS
oscam
DESCRIPTIONS
The OSCam software is an open source multi-protocol/multi-plattform SC
server.
OSCam supports the following protocols:
camd 3.3x
camd 3.5x
newcamd with AU support, cascading/remote server ECM support
radegast
serial (HSIC, SSSP, BOMBA, DSR 9500)
camd 3.57x with AU support, cascading/remote server ECM support
camd 3.78x with AU support, cascading/remote server ECM support
gbox with AU support, cascading/remote server ECM support
CCcam with AU support, cascading/remote server ECM support
DVB API with AU, multi tuner and PIP support
OSCam works on the following plattforms:
Linux (tuxbox, arm, mips, mipsel, sh4, powerpc, ...)
Windows (based on cygwin1.dll)
Mac OS X
OPTIONS
-b
starts in background
-c <directory>
read configuration from <directory>, default: see CS_CONFDIR in
globals.h, while starting OSCam prints warnings on invalid keywords,
comment lines start with # character.
-d <level>
debug level mask:
0 = no debugging (default)
2 = ATR parsing info, ECM dumps, CW dumps
4 = traffic from/to the reader
8 = traffic from/to the clients
16 = traffic to the reader-device on IFD layer
32 = traffic to the reader-device on I/O layer
64 = EMM logging
255 = debug all
-m <filename>
use <filename> as mmaped memory file, default: see CS_MMAPFILE in
globals.h, needed for embedded systems without shared memory and
windows
-h
usage
SIGNALS
SIGHUP
reinit user db, clients and anti-cascading, for newcamd connections:
after reloading the ident, please restart newcamd client
SIGUSR1
shift debug level to next level (see debug level mask above)
SIGUSR2
get reader SC info
SEE ALSO
list_smargo(1), oscam.conf(5), oscam.user(5), oscam.server(5),
oscam.srvid(5), oscam.guess(5), oscam.cert(5), oscam.services(5),
|
|
|
|
|
Fisicalsharing
|
|
« Responder #11 em: 20-11-2010 , 20:52 » |
|
oscam.user(5)
NAME
oscam.user - user configuration file for OSCam
SYNOPSIS
The user configuration file for OSCam contains user definitions.
[account] sections in oscam.user are recurring (more than one account).
DESCRIPTIONS
The [account] section
user = name
account name, required
pwd = password
password for account, required
hostname = hostname
host from which user connection is allowed
betatunnel = <CAID>.<ServiceID>:<target CAID>[,<CAID>.<ServiceID>:
<target CAID>]...
define Betacrypt tunneling (max. see CS_MAXTUNTAB in globals.h).
The ServiceID can also be used for wildcarded CAIDs.
example: betatunnel = 0100.0001:0200,0300.0004:0500
betatunnel = 0600.FFFF:0700
uniq = 0|1|2|4
unique level:
0 = disabled, default
1 = only one connection per user is allowed
2 = set user to fake if source ip is different
(e.g. for newcamd clients with different CAIDs and ports)
3 = only one connection per user, but only the last login
will survive (old mpcs behavior)
4 = set user only to fake if source ip is different,
but only the last login will survive
sleep = minutes
time waiting for inactive user, default:none
caid = <CAID>[&<mask>][:<CAID>[&<mask>]...
limit CAIDs, default:all CAIDs, required
example: caid = 0100&ffff:0200:0300&ff00
au = label of reader|1
AU setting:
label of reader = sending EMMs to specified reader
(security issue: client can see SC data!)
1 = auto AU is sending EMMs to all readers
(security issue: client can see SC data!)
default:none
group = group[,<group>]...
user assingment to reader group, default=none, required
services = [!]services[,[!]<services>]...
user [de]assingment to service group, default:none
ident = <CAID>:<ident>[,<ident>,...][;<CAID>:<ident>[,<ident>,...]]...
user assingment to idents, default:none
class = [!]class[,[!]class]...
user [de]assingment to classes, default=none
example: class = 01,02,!03,!04
chid = <CAID>:<ChID>[,<CAID>:<ChID>]...
user assingment to Irdeto ChID, default:none
monlevel = 0|1|2|3|4
monitor level:
0 = no access to monitor
1 = only server and own procs
2 = all procs, but viewing only, default
3 = all procs, reload of oscam.user possible
4 = complete access
expdate = <year>-<month>-<day>|<year>/<month>/<day>
expiration date for account, default:none
example: expdate = 2001-11-21
expdate = 2002/12/22
disabled = 0|1
1 = account disabled, default:0
numusers = quantity (only if anti-cascading enabled)
anti-cascading: user per account, 0 = anti-cascading disabled,
default:0
suppresscmd08 = 0|1
0 = CMD08 for camd3 3.57x/3.78x clients enabled, 1 = CMD08 for camd3
3.57x/3.78x clients disabled, default:0
keepalive = 0|1
0 = disable keepalive between server and client connection,
default:1
EXAMPLES
[account]
user = username
pwd = password
group = 1
au = myserialmousereader
services = myservice
betatunnel = 0100.0001:0101,0100.0002:0101
caid = 0100
ident = 0100:000000
uniq = 1
SEE ALSO
list_smargo(1), oscam(1), oscam.conf(5), oscam.server(5),
oscam.srvid(5), oscam.guess(5), oscam.cert(5), oscam.services(5),
oscam.ird(5), oscam.ac(5)
|
|
|
|
|
Votação
