[COLOR="Red"][SIZE="4"]CCcam 2.1.3 incl Oscam for V13 SKY[/SIZE][/COLOR]Hi @ all!
card to test - Unfortunately I am not a V13. However, I have some time together and write down to you here howto, with whom you your Sky V13 - go get the card by Oscam with CCcam 2.1.3 for should.
If that does not my version, so I ask you for help so that we get this HowTo errors.
Also included in this HowTo and additionally the HD + card integrated.
Well then, let's start ...
Dreambox 8000 INTERNAL ->
V13 upper slot (interfaces must be from the Sky Dealer .. freigeschalted 0180th!)
Hd + slot lower
oscam.conf
[global]
logfile = / dev / tty
nice = -1
waitforcards = 1
[Monitor]
port = 0
aulow = 120
monlevel = 0
[Newcamd]
key = 0102030405060708091011121314
port = 12 023 @ 1830:003411
[Newcamd]
key = 0102030405060708091011121314
port = 15000 @ 09c4: 000000
oscam.server
[reader]
label = hdplus
protocol = internal
detect = cd
device = / dev/sci0
group = 1
emmcache = 1,3,2
mhz = 368
n3_rsakey = see GOOGLE
n3_boxkey = See Google ... 37C
[Reader]
Label = skyv13
Protocol = internal
Detect = cd
Device = / dev/sci1
boxid = 12345678
EMMCache = 1,3,2
CAID = 09C4
Group = 1
oscam. user
[account]
user = test1
pwd = hd1
group = 1
uniq = 0
au = hdplus
monlevel = 0
[Account]
user = test2
pwd = hd2
group = 1
uniq = 0
au = hdplus
monlevel = 0
[Account]
user = test3
pwd = skyde1
group = 1
uniq = 0
monlevel = 0
[Account]
user = test4
pwd = skyde2
group = 1
uniq = 0
monlevel = 0
The 3 files to / var / tuxbox copy / config (rights / share chmod 755)
In the CCcam.cfg (not higher than CCcam 2.1.3) runs the BOX where Oscam it and put the cards in it .. add the following 2 lines
N: 127.0.0.1 test1 hd1 12 023 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 test3 skyde1 15 000 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
Then you have 2 N-lines can still use that one for free in their own local network, or "more" might be the "Kellerbox";.)
N: Ip of the box 12 000 hd2 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: Ip of the box test4 skyde2 15 000 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
I have to dispense any frills .. logfiles .. etc.. all unnecessary ballast.
EMM is suitable for the configuration of course, also ..
The files in the / usr / bin and / usr / script here in the Appendix of course then give write permissions (chmod) 755th
Now you should just in the GUI - can> EMU CCcam start menu along with the Oscam.
THX KLPsAUGER
